Saturday, November 29, 2014

BMW R1200GS LC 2014 versus Bandit 1250 review

STOP PRESS -I'm now at http://boxerlc.blogspot.co.nz/


Last night I picked up my brand new BMW R1200 GS, water cooled.  I ordered it with BMW vario luggage with top box, Navigator V integrated GPS, LED running lights, heated grips, hand protectors, steering damper, crash bars and headlight protector.  The bike is Alpine white, with factory fitted ABS, ESA (electronic suspension), ASC (stability control), cruise control, RDC (remote tyre pressure monitoring), optional wire wheels fitted with Micheline Annakee 3s and the BMW GPS mount.  The headlight is full LED with an integrated ring style running light.  Very eye catching.

The crash bars and LEDs are yet to arrive, but here it is without the side cases on


The GPS integrates in to the bike's LINBUS system, so shows maintenance information, fuel use as well as all of the good GPS stuff.  It's controlled by a wheel inboard of the left hand grip and is glove friendly.  The GPS locks on with the ignition key. Very cool.


The bike has a lot of technology.  Fly by wire throttle, and the suspension reads the road surface and adjusts.  You can set it for rain, road, dynamic (full power), enduro and enduro pro.  You can also set the preload remotely and have it as soft, normal and hard and for 1 or 2 passengers with or without luggage.

First impressions:  it is tall, even with the seat in the low position.  I am 6' and can just flat foot the ground.  It's heavy until you are moving, then the low centre of gravity makes it a breeze.  Much taller than the Bandit and a much bigger bike.  Starting it gives a real rumble and almost an aircraft noise.  It's not quiet at all.  Nice sounding.

The clutch is exceptionally light and the bike pulls away well.  In DYNA (dynamic) mode it oulls like a train.  125hp and greater torque than the Bandit.  It feels faster and torquier, but hard to tell until I run it in. The power is immediate and plentiful.  The Bandit is smoother but the GS just leaps away and you short shift it and feel it pull.

The luggage is cunning.  Very well made, integrated mounts on the bike and a lever in each case expands it.  Much heavier than the Givi stuff on the Bandit and more chunky and utilitarian.  The top box will hold my helmet and gloves but not as roomy as the Givi V46. 

Braking is fantastic.  Linked Brembos with braided lines and ABS.  The front brake also activates the rear and the rear just does itself.  Absolutely confidence boosting.  Much better brakes than the Bandit.

Handling is really really good.  The bars are high and wide with heaps of leverage in the twisties and the seating is very comfortable and upright.  The seat is much more comfortable than the Bandit and the rear adjusts fore and aft (girlfriend or wife adjustment joked the dealer).  The low C of G means the bike is easy to handle and the suspension makes the worst corners easy with no sign of wallowing or poor tracking over corrugations.  There's no comparison with the Bandit.  Corners that would have made the Bandit bent out of shape were eaten by the GS without a sweat and there's no way I could keep up with the GS with a Bandit on windy country roads.

The Bandit is a great bike and while the GS is superior, it is also about three times the cost.  It is fair to say that I just LOVE the GS, but I still rate the Bandit for what it is.  As an every day bike you can maintain yourself, the Bandit is the best.  I can't maintain the GS.  Shaft drive isn't touched, it's all computerised and being under warranty I can't touch it.  Consumables are quite cheap and service intervals are 10,000 km.  Really easy to adjust the valve clearances here.

I have only done 100 km on it and all on road, so more writeups to be had yet.

If money is not a problem, the GS is unbeatable, but of course the Bandit is far better value for money. The Gs has a lot of on road presence. People stop and stare at it.

I am smiling.. A lot.










Friday, November 14, 2014

With great regret today I sold the Bandit.  50,000 km still on original chain and sprockets (thanks Scottoiler) and still like new.  Why?  I am going to buy a new BMW R1200GS, so there will be writings about that to come on the blog.

Watch this space

Wednesday, October 1, 2014

2015 Suzuki Bandit GSF1250SA

The latest model Bandit is due for release in 2015.  These pics from Europe show what is a newly designed fairing.  Here's hoping they come here!










Tuesday, September 9, 2014

Saturday, June 14, 2014

2014 DL1000 compared with Bandit 1250

A friend has a 2 day old DL1000 V Strom coloured black.  He brought it round for me to fit Oxford Sports heated grips for him.  The dealers quoted NZD$600 for the OEM ones, which is simply outrageous, so Oxfords fitted the bill nicely, and were wired with a relay powered by tapping into the 12V socket on the dash.  All good there.

I used to own a K7 DL650 and have ridden the earlier 1000s, so had familiarity with the style of bike.

A brief ride revealed a quite tall seat.  I am 183 cm and easily flat foot my Bandit, but it was a challenge to move the bike by using my feet (no, not the Flintstones - turning the bike in my yard).  A nice, neutral and upright sitting position, much like the earlier Stroms.  Wide bars and the same levers as the Bandit.  A simple instrument cluster and a nice touch was ambient air temperature as well as traction control (which I didn't get to try other than change the settings).

Build quality was good.  A lot of plastic, but easy to replace if needed.  A very comfortable and supportive seat.  Upside down forks with lots of adjustment and what looks like radial brakes from the GSXR1000.  Braking power and feel was simply superb.  A lot better than the Bandit.  Power and acceleration was good for this sort of bike.  The Bandit (with Stage 2) feels faster and smoother, but the V twin feel is nice and the bike is powerful. The low end vibes feel more like the smoother 650 than the old thou.  Nice handling and good leverage through the bars.  No buffeting via the adjustable screen, a huge improvement from the older Stroms. Still more a road bike than a true adventure bike.  Very exposed header and oil filter and not something you'd want to tip over.

Would I buy one?  Yes once the price comes down on low mileage examples.  I like the look and it is comfortable, and the braking and traction control make a nice overall package.  Still too expensive, though.  $19K and a new Bandit can be bought for under $13K and set up with full luggage.  It is a significantly better bike than the old model thou.  

I enjoyed it but my Bandit is running so perfectly it would take something rather special to drag me away!

Tokico radial brakes and ABS.  Great power and feel


Adjustable screen and stacked headlights


Simple and clear gauges.  The 12V socket is a nice touch


Huge exhaust can gives a muted burble.  A Yoshi would help!

Sunday, May 25, 2014

So what modifications do you recommend for a GSF1250 Bandit?

I have had the bike now (a GSF1250 S model, ABS, faired, 2008) for almost 4 years.  I am a fairly conservative rider (not quite boring), and have clocked up over 40,000 km on it in a mixture of commuting, touring and just riding for the hell of it.  If you have read my blog in detail, you will see that I have done a lot on the bike.  Some mods I have kept, and some I have discarded.  I thought I'd do a bit of a 4 year summary of what it is like being a 1250 Bandit owner, together with a summary on the mods I think make the bike better. 

The Bandit has been utterly reliable (except for the starter, which I will talk about later), despite being ridden in all weather.  At 45,000 km I am still on the original chain and sprockets, which is in no small part due to the fact that I have a Scottoiler fitted.  Are the Scottoilers worth it?  In my view, yes if you plan to keep a bike and ride it a lot.  No if you ride it occasionally and don't like to get wet (a can of chain lube lasts a long time).  There's lots of debate abut what chain lubes to use.  I have tried a lot and quite frankly, it doesn't matter as long as you either have a Scottoiler, or simply keep the chain lubed.

The Bandit is easy to tune yourself: if you can walk and chew gum at the same time, you should be able to do your own tuneups.  A good socket set, an oil filter removal tool, some screwdrivers, allen keys and a couple of torque wrenches (a low range and a high range) will do most stuff.  If you want to get into balancing throttle bodies, a set of gauges is required (I use a Morgan Carbtune Pro), and a basic multimeter helps for diagnosing electrical gremlins (rare on a Bandit).  I recommend getting a Haynes Manual.  The factory manuals are available on line, but assume you have specialist tools and knowledge.  Some things like bleeding the water pump are in the Haynes Manual but not the OEM factory one.

The engine is fantastic.  Massive torque at low revs, and very usable power at real world speeds.  Significantly over-engineered and will last a long time.  Other high capacity bikes may make more peak horsepower, but the Bandit has it right where you need it.  There's easy extra power to be had.  The way I have done it is with Dale Walker's Holeshot Stage 2 kit (www.holeshot.com).  In essence, opening the airbox, replacing the air filter with a K&N and adding a piggyback Tuneable Fuel Injection (TFI) module, liberates about 25% more horsepower.  Torque and power is improved, and with removal of the secondary butterflies, the bike is freer revving and doesn't run out of power up top.  You have to have a replacement end can as well. (More about this later too).

Some folks have gone down the PowerCommander route.  These work similarly and have more adjustment than the TFI, but you will need to spend money on dyno tuning with a professional to get it right.  (Dale's setup is plug and play).  There's other TFI type boxes too, like the Juicebox, but the cost of a dyno to get it right adds up.  Some folks offer remapping of the bike's ECU, but it again needs a dyno to get the most out of it.  Whichever way you go is personal choice.  I like Dale's setup and his personal service.  Whichever way you go, the bike needs it, as they are tuned lean and many surge at low throttle openings.

Just to confuse things, there's two different K&N air filters.  Go for the SU-6500, which is listed for the 1200.  It is the same external dimensions as the SU-6505 which is listed for the 1250, but has more filter surface.  Not much in it though.  If you aren't doing other mods, I recommend keeping the standard air filter.

You can use any of these setups with pipe and filter remaining stock as well.  Smoother running, but no real extra power.  Just don't half do it and lean it out with a pipe and filter and airbox mod without adding fuel.  The bike won't go better.

Is it worth doing?  It's a lot of money you won't recoup, so if you change bikes like socks, I wouldn't.  If you plan to keep the bike a while, go for it.  It's what Suzuki should have built.  The power is copious right where you need it.  Just don't let unsuspecting friends leap on and open the throttle, as the power is right there from idle and it can bite the unwary.

What about pipes?  I have a Yoshimura TRS on mine.  Why?  Because the previous owner fitted it and it looks and sounds great.  Much of the muffling on the Bandit occurs in the headers with the catalytic converter, so most cans sound fairly similar, so whatever you choose will be on looks and price more than anything else.  They are much lighter than the stock cannon, and when coupled with intake mods, give you a lot more power.  Don't expect a lot more just by adding the can to a stock setup though.  The bike needs more fuel going in to stop it running lean.

Headers are available and with appropriate induction mods, can give another 3-5 Hp on top of the stage 2 setup.  The standard pipes are double walled and the honeycomb catalytic converter adds to the restrictions. Some have punched out the cat with a steel rod, but you will need an oxygen sensor bypass plug as the sensor won't work properly.  Headers can be expensive (I am in New Zealand so shipping is costly).  Dale Walker makes his own sets, and there are a couple of others out there including some by Delkevic.  I don't need the extra power, and the cost benefits aren't there for me on headers.  I'd rather spend the money on suspension mods to get power to the ground more effectively.

If you are a rider who rides on the bottom end of the rev range, think carefully before spending a lot of dollars.  The Bandit 1250 even fully stock has a lot of power.  It comes down to choices: do you want more power through a fairly ordinary chassis, suspension and brakes package, or do you want to go down that route instead?  (And hey, if you have the money, do both, but don't expect to recoup the costs).

Oil changes on the Bandit are easy.  Use tinfoil to stop the oil from the removed filter leaking onto the headers.  I use either OEM filters or K&N KN-138.  I have tried all sorts of oils, but changing the oil every 6,000 km means expensive oil = expensive waste.  Use a good semi-synthetic like Castrol 4T or Golden Spectro.  The engine is understressed and as long as you don't use car oil or the wrong grade, it's really a price and availability thing.  There's endless on line debates to confuse you.  Just use a torque wrench on the sump plug so you don't strip the threads as some have done.

I use NGK CR7 EIX iridium plugs, but there's no discernable difference (be careful of counterfeits on EBay).  Good quality NGKs are not expensive.

Valves are checked at 24,000 km intervals.  It's really rare to hear of anyone finding one out of adjustment, even at really high miles.  It's a pain to get the valve cover off the engine, and beware the rubber block that can fall into the depths.  Get it high temp siliconed in place to reduce the risk of it being dislodged on reassembly and ruining the engine. 

Tuneups are mainly an oil change, the occasional plug change and that's pretty much it.  Easy.

Tyres are another personal choice thing.  I used Michelin PR2s with great results, and am now on PR3s.  The PR4s are now out so I guess I will use them.  Great wet weather performance and long wear for my riding style.  Keep pressures at front 38 and rear 42 psi.  Fitting right angled valve stems is good, as it means easier access at tyre pumping time.

Brakes are average.  The non-ABS models have better lever feel as the lines are shorter.  Best results are by using a good quality brake fluid (keep the system fresh and bled), and sintered pads.  I use Ferodo sintereds on the front, and non-sintered rear, primarily because Dale Walker recommends them and he is, as far as I am concerned, the Bandit guru.  EBC HH pads are also well rated by owners.  Feedback from others on replacing the ABS lines with braided lines is mixed.  The lines are so long and the master cylinder is average and the difference is not as great on the ABS model as it is when replacing lines on the non-ABS.  Hey, if you want awesome braking and a chassis to get a knee down with, get a GSXR or a Hayabusa, as you won't get a lot more out of Bandit brakes without significant changes.  Sintered pads make a big difference.

Electrically, replacing the stock bulbs with something better rated is helpful.  I have used HIDs in the past (see the blog for details), but they are not legal in NZ and can dazzle other drivers.  I have LED running lights and have used Narva Platinums as my main bulbs as they are a better match for the bluer white LED park lights and running lights.  I have also fitted a Speedohealer as the stock speedo overreads by 7% at 100 km/hr with standard gearing.  A Stebel Nautilus is a must as far as horns go.  Blazingly loud.  A waterproof 12v marine socket in the fairing inner helps charge accessories.

Screen-wise, this is very much a personal preference thing according to your size, riding stance and helmet choice.  I have the stock screen (wind hits chest), the Suzuki OEM touring screen (aka MRA Vario - much better), and have just fitted a Zero Gravity touring screen which I am liking a lot.  Wind hits the top of my helmet but no buffeting.

I also have the factory lower fairing.  Looks nice and keeps crap off the engine, but has zero rider protection (does not affect engine cooling at all) and is mainly cosmetic.  Don't bother unless you simply must.  I also have GSG-Moto crash knobs, which help at a stationary drop or on a track.  On the road, my view is that the bike slides further until the knobs hit the kerb and shear off anyway (bitter experience).  A radiator guard is a must.  I have a RadGuard but there's lots to choose from.

Seats are a matter of personal choice, much like shoes.  Your butt may differ.  I had the OEM seat (torture after 150k), the OEM gel seat (300k) and now a Sargent low seat (no torture yet).  Corbin is also popular.  Personal choice thing, really.  It's not a GoldWing but you can improve things a lot.

I have added SW-Motech bar backs to provide a more comfortable riding position.  You can keep the stock lines, but the top brake line will be tight.  I had a hew one made up locally.  V Strom 1000 hand guards also help the comfort for cold weather, as do Oxford Sport hot grips.  I have also added the SW-Motech adjustable mirror extenders.  Blocks to extend mirrors also work but the SW-Motechs look better in my view.

Luggage is personal choice, but as a minimum I endorse a Givi top box ( I use a Givi V46) as it is so handy for carrying groceries, bike parts and other useful stuff.  No impact on handling.  If you plan to tour, the best looking option is the Givi V35, which match the lines of the bike and you can get colour matched panels for the tops.  I don't use them a lot, and the biggest annoyance is kicking them when Iforget  they are there.  No impact on passenger seating at all.  They are costly, so think hard about them.  Fantastic quality though!  With Givi side cases, they fit best with the OEM pipe, and with aftermarket pipes you may need to add a small strap extender to clear the bottom of the case (I have seen some melted ones).  Easily made.

To keep road spray off the bike, a Fender Extender for the front is a must.  It should be fitted from new and keeps the radiator free from debris.  There is a rear one available that is moulded to fit the rear mudgard and looks OEM.  This makes a big difference keeping spray off the top box, and the difference is marked.  When I got the bike it had a tail tidy, but quite frankly all they do is allow more rubbish to spray up the back.  I have an Ermax hugger fitted as well.  Great for keeping the shock and rear of the bike clean.

Handling wise, the OEM suspension is adequate for daily riding, but fitting better fork springs and emulators up front and a quality rear shock is common.  The biggest issue for me is cost, and I haven't bothered yet.  Be aware that the ABS bikes have limited space, so fitting things like a Hayabusa shock is not an option on these models.  Dale Walker's site lists some suspension options which are quite cost effective.  On reflection, if you want to spend money on the bike, start with suspension and seat first before motor mods.  You will be a safer, faster rider, as in my view making the stock bike faster just shows the limitations of the chassis and brakes.

The starter has been the only issue on this otherwise great bike.  A small number of bikes, including mine, the magnets fail in the starter and jam it solid.  Not repairable and nothing you can do to prevent it.  I bought a spare in case (and it paid off), so if you have the opportunity to get a cheap second hand one, it's a good investment.  Some people have had issues with a clogged intake screen in the fuel pump limiting power on acceleration, and some have had pumps replaced as a result.  This is usually repairable, so don't let a shop charge for a new pump unless the pump motor itself has failed

Over-all,  I have a bike that I can use as a daily commuter.  ABS helps with the safety, and the bike is easy to handle with an upright seating position that helps with visibility and control.  Power is plentiful at real world speeds and a well ridden Bandit will keep up with sports bikes in most places, but with a lot more comfort.  Reliability and parts availability is excellent, and most home mechanics will have no problem maintaining it.  Adding luggage and a better seat makes it a powerful tourer with decent fuel range and at a fraction of the cost of a full dress tourer.  It's versatile and cost effective.  I have ridden a lot of sports tourers including the Hayabusa, but the Bandit is still my choice as it is so comfortable and holds its own except for the most insane riding (and if you want to ride at 10/10ths you probably won't have bought a Bandit anyway).  The only bikes I have thought would be the next step (Kawasaki. Concours and BMW R1200GS) are a lot more expensive.

Any regrets?  None.  I have done a lot of other mods, so feel free to read the blog to see what you may want to try.  It's a fun bike to work on and personalise, and it is a bit of a "sleeper" in that it can really surprise people who may think it's soft.  Each time I get back on it after a sports bike, it feels like a big dual sport in comparison.








Saturday, April 26, 2014

Sargent low seat on GSF1250

For some time I have had the Suzuki OEM gel seat on the bike.  It's better than the hell plank that is stock, but after an hour or so I still get sore.  The gel seat is firmer, but I find the edges attack the inner thighs after a while.

Here's the standard gel seat.  Much heavier than stock, but a fairly similar shape.  Better, but not a lot better. 


I managed to get a really good deal on a used (barely) Sargent low seat number WS-569.  I wanted the low as I had seen a lot of negative feedback from Bandit owners who felt the standard was too high.  This low seat is the same height as the OEM seat in low position.

First impressions:  much flatter and narrower in the front and cushier.  Edges where they contact the inner thighs are rounded. Supports the sit bones well.  Nice carbon fibre effect cover material. Bigger gap between seat and tank (no paint rubbing). One piece with a custom base with a cunning storage pocket in it (nice). Has a rubber cover on the rear edge for the accessory backrest. Very well made.  On a one hour ride it felt good.  OEM 3/10, Gel 5/10, Sargent low 7.5/10 (for my backside - your results may differ).  Recommended.




Sargent.com images below












Zero Gravity Screen on a GSF1250

I have had the OEM Suzuki touring screen on for years and felt like a change (here it is)


I managed to get a good deal on the smoked Zero Gravity screen.  Much taller than the Suzuki screen, and it puts a little more air at the top of the helmet (I am 6' or 183 cm).  It looks really nice on the bike too.  Follows the lines well, and I think I will keep it on.







Monday, March 17, 2014

Aftermarket GSF1250 starter

Hmm, there's an aftermarket starter doing the rounds on EBay.  I have sought more detail to see if build quality is better than Mr. Suzuki's: 


http://www.ebay.co.uk/itm/STARTER-MOTOR-TO-FIT-GSF1250-GSF-1250-BANDIT-NEW-PART-SUZUKI-RRP-437-00-/111293341069?item=111293341069&pt=UK_Motorcycle_Parts_13&hash=item19e9999d8d



Tuesday, March 11, 2014

Pair of GSF1250 Suzukis

The mountain is Taranaki (was called mount Egmont) in New Zealand last weekend



 

Saturday, January 18, 2014

Suzuki GSF1250 diagnostic trouble codes (DTC)

Buy the Suzuki mode switch part 09930-82720

Connect it to plug under right side cover, switch on and turn on bike.  The codes below are the active (not stored) issues

-C00 no fault
C12: CKP sensor – Crankshaft Position
C13: IAP sensor (No.1) – Inlet Air Pressure
C14: TP sensor – Throttle Position
C15: ECT sensor – Engine Collant Temp
C17: IAP sensor (No.2)
C21: IAT sensor – Inlet Air Temp
C23: TO sensor – Tip Over
C24/C25/C26/C27: Ignition signal
C28: STV actuator - Secondary Throttle Valve
C29: STP sensor – Secondary Throttle Position
C31: Gear position signal
C32/C33/C34/C35: Fuel injector
C40: ISC valve – Idle Speed Control
C41: Fuel pump relay
C42: Ignition switch
C44: O2 sensor
C49: PAIR control solenoid valve
C60: Cooling fan relay
C62: EVAP purge control valve (E-33 only)

Walkthrough on balancing the throttle bodies on a GSF1250

Here's a walkthrough on adjusting the throttle bodies on a GSF1250.  Works for the FA and the GSX650F and water cooled injected 650 Bandits.  As with anything mechanical, this is my experience, yours may differ, and you do this at your own risk etc.

There's 3 options to balance the TBs.  The first is what is recommended in the Haynes Manual, which gets you to put the bike in dealer mode with the switch above and connect the balancer.  This has the IAP sensor (number 1) disconnected and it throws fault code C13.  It works OK.

The second is to use the suzuki SDS software and follow the steps in the dealer manual.  The problem is most of is don't have the SDS.

The third is to apply vacuum to the IAP sensor so the bike thinks its pulling vacuum.  What I am showing is a variation on this that gets the bike to pull its own vacuum via a T piece on the Carbtune.

In short there's a few ways to do this.  What you can't do is pull the vacuum hoses off and just connect the Carbtune, as the vacuum hose to the IAP won't be there and the bike will have a tantrum about it and not run properly or idle.

Firstly, remove the right hand side cover and connect the Suzuki test switch (cheap on line and a good investment) and check for fault codes.  You don't have to do this, but it's peace of mind and your bike will tell you if there's any fault codes. I will post the codes in a separate post.  Here's the connector:


and here it is with the switch connected (a paper clip works too)


You turn on the switch and if the TPS is correctly adjusted, you get -C00 as you see below.  I have how to adjust it elsewhere on the blog.


You then remove the fuel tank.  I suggest sitting it between two chairs as it won't sit on a flat surface


To prop the tank up on the bike you can use bits of wood or get the tank props from Scott at Metrick Metal (www.metrickmetal.com)


Get a carb balancer.  I recommend the Morgan Carbtune.  Remove the 4 vacuum hose connectors off the throttle bodies, and connect number 1 (left side), to number 1 on the Carbtune, and so on.  What I did was put a T in the number 4 hose and connect this to the vacuum on the IAP sensor.  This means no messing round putting the bike into test mode or trying to pull a vacuum on the IAP.  The bike does it for you, and in my view it most closely replicates normal running conditions.

I am pointing at the IAP (number 1) here


And here it is off the bike and connected to the Morgan Carbtune (I have an extra IAP sensor that lives with the Carbtune). 


Connect the  number 4 line in the normal manner and connect the electrical connector to the IAP as well.  You will see that the number 4 line pulls vacuum to the IAP so the bike thinks it is all connected.  Simple.

Once connected, prop up the tank, and turn on the bike.  I then go and do things like lube the chain until the bike warms up enough to trigger the fan.  


After the fan kicks in, wait for it to turn off again.  The bike is at operating temperature.  Check the readings.  This wasn't too bad, but still room for improvement.  I use no. 2 cylinder as the base line


Use a small screwdriver and gradually adjust each cylinder.  The bronze screw is shown below in the middle of the pic and there's one on each throttle body.  Screwing in makes the tube rise. Just a fraction of a turn and you will find each throttle body has an impact on the others so you need to go back and forward a bit.  If your bike is out you will hear the idle smooth consideably.

When you think it's right, blip the throttle.  Don't do any adjusting when the fan is on either.  When you blip the throttle, the tubes won't settle evenly, so there may be more adjusting to do.  Take your time.  It's not hard, but check each time you think all is good by blipping the throttle.

If you stuff up, screw the number 2 air screw in till it seats, back it out 1.5 turns and adjust the others to that.  There's no vacuum reading as such, just get them all the same.



Here's where I got mine to this afternoon.  These things are out of whack from new and it makes a lot of difference to idle, clutch rattle and low speed running.


After you finish, reconnect the vacuum lines, check and check again, reconnect the fuel line, electrical connector and vaccum hoses and bolt the tank back on.  Make damn sure the fuel hose positively clicks on, as if they part company under pressure, it means fuel on a hot engine and your back tyre - i.e. potential crash and burn scenario.  Be safe and make sure all fuel lines are well clicked on.

Once you are all connected up, check the bike runs OK (rough idle, failing to idle is either a vaccum hose off or you forgot to reconnect the IAP)  Go to a friend's for a barbeque and go for a ride in a 1912 Renault.

It was a good day.























Saturday, December 14, 2013

Today's pic of a pair of GSF1250 Bandits

After a morning tuning a friend's bike, we earned a well deserved cafe break.  Running with the standard can now, albeit with a Stage 1 tune and secondaries out.  Smooth as silk.


Wednesday, December 4, 2013

Tuneup time - walkthough on changing plugs and oil on GSF1250 and GSX1250FA

I thought I would do an owner's description of a basic tuneup (plugs, oil and air filters) to help out those who want to give this a go.  A lot of manuals assume basic knowledge, but judging from on line questions on the forums, there's a need for basic advice.  Doing this yourself will save a lot of money.

This guide reflects my personal experience, so do it at your own risk - if in doubt, consult a mechanic. It is worth investing in a repair manual.

What you will need is:

- a good metric socket set, ideally with an extension drive to give more reach and one of those flexi connector enabling you to use it on an angle
- an oil drain tray capable of taking at least 3.5 litres and not so big it won't slide under the bike when on the main stand
- a long Phillips screwdriver (12 inches or so)
- a torque wrench capable of low range reading from around 10 - 25 nM (not essential but good to have)
- some rags
- set of vice grips, a small vice, hammer and small cold chisel to remove the crush washer off the drain plug
- oil (4 litres of 10W40 semi synthetic such as Castrol 4T or Golden Spectro)
- oil filter (OEM or after market)
- drain plug washer (recommend OEM but copper OK)
- air filter (or cleaning kit if you use K & N or BMC or similar washable one)
- spark plugs
- stainless steel measuring jug and funnel
- copper anti-seize grease 

I bought a new set of Iridium plugs off Ebay (at less than half the price I'd pay in NZ).  The type is NGK CR7EIX. The iridiums last longer than a standard plug and allegedly fire better, and I can get them for a similar price to standard plugs here.  I can't say I can detect any difference.  The standard plugs (NGK CR7E) work fine though. (You can also use Denso U22ESR-N).  The plugs are easy to replace, and I do this first while the engine is cold

1. Remove the tank and lower fairings if they are fitted.  To remove the tank, grab a rag and a 10 mm ratchet.  Remove the two bolts at the rear of the tank and wiggle it back an inch and lift the rear.  On the right rear are two rubber vent/overflow hoses that press fit onto spigots on the tank.  They just pull off, but can be a bit sticky.  I pull the tank back a bit more and hug it and remove the electrical connector on the right middle by depressing the tab.  This can be sticky, so a smear of electrical grease makes subsequent remove easier.  I slide a rag underneath the fuel outlet, then depress both blue tags with my left hand while pushing with my right thumb against the lip of the connector.  It will pop off the end of the pipe.  (This is why I hug the tank and it's not misguided mechanical intimacy). Reinstallation is just the reverse.  Make sure the fuel connector goes on with a positive 'click' as it is pressurised and you don't want it popping off with the bike running.   If you miss the electrical connector the bike won't start.
2. Use the smaller of the two spark plug wrenches in the bike's tool kit plus the 14 mm spanner
3. Start on the left hand side (in fact either side), and unclip the connector from the coil stick by depressing the small tongue on it and wiggling it back.
4. Rotate the coil back and forwards a little.  I use a long screwdriver to gently lever under the coil top to pop it free of the plug.  Don't use too much force.  
5. Slide the coil stick up and wiggle it past the cutout in the frame tube to let it free.  If you have compressed air, blow in the plug well before removing the plug to remove any grit before removing the plug.
6. Push the plug wrench down onto the plug and use the 14mm spanner to undo it.
7. Take the NGK plug, remove the screw on cap, put a smear of copper grease on the threads (not essential but helps stop threads seizing) and screw it in.  Do this by seating it firmly in the plug spanner (the rubber grommet holds it in place), and screw it in gently first by hand, being careful not to cross thread the plug.  Be careful not to over tighten.  11 Nm if you have a torque wrench that fits, or use the spanner but hold it near the head so you don't lever on it. Don't try and gap the iridiums - they are factory set
8. Check that the coil stick is clean and free of corrosion (I often use CRC silicone spray to clean it) and put it back onto the plug and give it a firm push and a wiggle.  They usually click down after a good firm push.  Make sure it's well seated.

I usually go to the other side of the bike and do the other outer plug the same way.

I then get a 10mm socket and undo the 4 bolts holding the thermostat to the frame so you can wiggle it out of the way.  I use a 14mm socket on a flexible adaptor on an extension bar to allow me to use a ratchet to remove the middle 2 plugs. You can use the spanner but it takes ages and is fiddly.  The process is the same for the other plugs and I use the smaller of the two plug wrenches this way.  Don't forget to replace the thermostat bracket before you replace the tank!

While the tank is off, I check and clean (or replace) the air filter and make sure everything is clean. There are 4 screws on the filer cover, one at each corner of the box.  Whoever designed it needs a beating.  I suggest removing both side covers and accessing the bottom-most screws and put some tape on the sides of the air filter box where the captive nuts live.  If you don't, at some point the nut will get flicked out while you are trying to replace the cover and disappear somewhere, never to be seen again.  (Don't ask me how I know). Rather inconveniently, Suzuki don't sell them and they are an odd shape to fit the cutouts on the filter box. Buy yourself a long Phillips screwdriver to reach them, and take it from me, spending a little time to tape them in place will save a lot of swearing!

I then start the bike and make sure it is running properly.  If you have the gear, that is the time to check the TPS and throttle body balance (search the blog for instructions).

I let the bike warm up and while doing so, check the coolant level at the reservoir (make sure the cap is fully seated afterwards), and the throttle free play.  I use a good linkage lubricant (don't use WD40) on any pivot points and give everything a once over (chain tension and condition, brake pads, fastener toghtness etc). 

Once the bike is warm, I change the oil.  I use the OEM filter and bought a cheap filter removal tool that pushes onto the end.  K and N also make a good replacement (KN138 or a Hi-Flo HF138) with a handy nut on it.  Put some cardboard or newspaper under the bike and put a drain tray under it.  I turn off the bike and use a 17 mm socket to remove the drain plug.  Use disposable gloves as the oil is hot and used oil is carcinogenic.  Undo the plug and remove it and let the oil drain.  Remove the fill plug and wait until it's all cleared out, then get some tin foil and fold it under the filter and shape it so it funnels oil that flows out from the filter base into the drain tray.  It stops oil flowing over your headers and stinking when you start the bike.  Undo the filter until oil is flowing onto the tin-foil and let it drain.

Once the bulk of the oil stops flowing, undo the filter further and remove it from the left hand side by pulling the radiator hose out of the way (nothing needs to be removed).  Mechanics gloves help as the headers are hot.  Give the filter base on the engine a wipe, smear some oil onto the new filter O ring and reinstall.  Tighten it until it's snug and turn it about another turn (don't try the 2 full turns as the manual says as you will overtighten).  It doesn't need to be cranked up, fully hand tight plus a bit is sufficient!

Check the drain plug.  There shouldn't be chunks in there of metal or fibre.  You should replace the drain plug washer.  The OEM one is a crush washer and I use these (you can also use a copper washer).  The manual is silent on removing the thing and I am convinced that the person who designed this also designed the air filter screw location.

To remove the washer, I put the head of the drain plug in a vice (not the threads) and use a small cold chisel and tap gently on each side of it between the bolt and the washer, to fold the edges up gently.  I then use vice grips to grab the folded up edges and then unscrew it up the threads.  It's easier than trying to cut it off, and unscrews nicely. Be careful when you first do this as the old washer crushes on well and it looks like it's part of the bolt.  You can likely get away with re-using it but it's not recommended.

Replace the drain bolt, being careful not to cross thread, and I really recommend using a small torque wrench (22 Nm) as people have been known to crack the sump through overtightening.

With filter, you will need 3.5 litres of 10W40 oil.  Add about 3.2 litres first, (make sure the drain plug and filter are in place or you will make a huge mess) and replace the fill plug and start the bike and idle it until the oil light goes out.  Go and have a coffee and then inspect the oil level with bike on the main stand.  I find 3.5 litres takes it to full.  It is really easy to over fill if you don't wait for the oil to slowly drain back into the clutch cover.  You won't need more than 3.5 litres.

Changing the plugs takes less than an hour and oil about half an hour once you have done it once or twice.  Take your time, don't overtighten and if a friend who knows their way can help out, so much the better.






Wednesday, November 6, 2013

GSF1250S headlight bulb

I thought I'd try a different type of headlight bulb after one of the HID units lost a connector.  Many on the forums recommend Philips Xtreme Vision bulbs, so I got some from the UK.  They are touted as 100% more light than a standard H7.

They are around 3400k in colour, so are more yellow than the 6000K HIDs but our eyes are evidently designed to use that frequency range (similar to sunlight).  The vision is good, and as a non-HID bulb are very good.  I like them.



Saturday, October 12, 2013

A Beautiful weekend

After a great ride with a fellow Bandit rider, I thought I'd give the bike a thorough clean and check.

Scrubs up really well, especially using Turtlewax Ice