Tuesday, February 14, 2012

GSG Moto Crash knobs

Here's the instal of my replacement GSG moto crash knob, which is made in Germany for the GSF1250 with the lower fairing.  (http://www.gsg-mototechnik.de/)  One side was trashed after my crash. but I guess the fact I am able to ride my bike again means it did its job.  A nice product and good service from them.


The knobs are joined by a thick pipe as well as frame mounted.


The crash knob has a push on cover that is replaceable




The plate was bent from the crash, but in bending, it absorbed impact forces that would have otherwise damaged the bike
Posted by at

6 comments:

  1. UnknownMay 8, 2014 at 7:32 PM

    So, the only damage you had during the crash with the first set of these frame sliders on was only a broken handlebar? No damage whatsoever to the fairings? If so then these sliders are a MUST have.

    ReplyDelete
  2. lance cockleMay 8, 2014 at 8:08 PM

    How do you find these crash knobs, and do you have an opinion about comparison with R-G Racing knobs

    ReplyDelete
  3. KewwigMay 9, 2014 at 4:36 AM

    Damage was extensive as while the bike was initially protected, it slid along until the slider was impacted at right angles by the kerb and sheared off. Best benefit is on a track where there's not much to hit, or a low speed or stationary drop. I haven't seen R&G sliders to compare

    ReplyDelete
  4. Uquirebron_zo-PortlandApril 23, 2022 at 1:52 PM

    Uquirebron_zo-Portland Brenda Anderson https://wakelet.com/wake/kq7yaw0W6J94If6b2MpNp
    rtherynmensio

    ReplyDelete
  5. poeniim-dzuAugust 25, 2022 at 6:52 PM

    poeniim-dzu Byron Mancuso Avast Cleanup
    Google Chrome browser
    Driver Genius
    dragerroca

    ReplyDelete
  6. propacVtio-buNovember 30, 2022 at 12:56 PM

    adsiprobko1989 Thomas Newman Download
    Click here
    maesuncopa

    ReplyDelete

Subscribe to: Post Comments (Atom)